Skip to content
Adalwin Global

Home/Blog

Spec Guide17 Nov 2026·7 min

The Hotel Bed Linen Buyer's Guide: Weave, Thread Count, Sizes and Laundry

How to specify hotel bed linen properly, from weave and thread count to fibre, sizes, pillow and duvet covers, and the laundry that decides how long it lasts.

A hotel bed made up with white cotton sheets, pillows and a duvet
A good sheet is specified long before it is made up on a bed.

To specify hotel bed linen, start with your laundry and your guest, then choose the construction. For most full-service hotels with industrial laundry, a 200 to 300 thread count single-ply cotton percale gives the best balance of feel, durability and cost. Sateen at 300 to 400 thread count suits luxury rooms where presentation matters more than laundry cost. Specify ply, yarn, weave and weight as well as thread count, or the number alone can mislead you.

Which weave should you choose?

PercaleSateen
ConstructionOne over, one underFour over, one under
FeelCrisp, matte, coolSmooth, soft, slight sheen
Durability in industrial laundryHigherLower; more prone to snagging
Best forFull-service and high-turnover hotelsLuxury rooms and suites

Our percale vs sateen comparison goes deeper, including what each does to laundry cost.

What thread count do you actually need?

Thread count is the number of threads in one square inch. Real improvements happen roughly between 200 and 400. Above that, the gains are small, and very high numbers are often reached by counting each strand of multi-ply yarn separately.

Thread countTypical weaveTypical use
200PercaleMidscale and high-turnover properties
250–300PercaleFull-service hotels
300–400SateenUpper-upscale and luxury rooms
400 and aboveSateen, finer yarnsLuxury suites, with higher laundry cost

Always ask whether the yarn is single-ply. A 300 thread count single-ply sheet can outperform a "600" built on two-ply yarn. Our guide to what thread count really means explains the counting.

Cotton or poly-cotton?

100% cotton feels best and breathes well. Combed cotton gives a smoother, stronger yarn and is worth specifying from upscale hotels upward. Poly-cotton blends dry faster and crease less, which suits high-volume laundries and budget properties, but feel less natural. Our piece on cotton-rich vs 100% cotton sets out the trade-off honestly.

Which items and sizes should you specify?

Confirm sizes against your actual mattresses and duvets, because standards vary by market and by bed manufacturer. These are common reference sizes in inches:

ItemSingleQueenKing
Flat sheet60 × 10890 × 108108 × 108
Duvet cover62 × 9292 × 102102 × 108
Pillow cover18 × 2820 × 3020 × 40

Many hotel groups use flat sheets top and bottom, because they fold and launder flat. Fitted sheets stay neater on the bed but have more elastic to wear out. See flat vs fitted sheets for the full trade-off.

For pillow covers, envelope closures change fastest, Oxford styles look more formal, and zips give a secure fit for some laundry set-ups. For duvet covers, zips are usually the most practical in commercial laundry.

What belongs on the spec sheet?

  • Fibre and yarn: for example, 100% combed cotton, single-ply
  • Thread count and weave
  • Fabric weight in GSM, with tolerance
  • Finished sizes with tolerance, and pocket depth for fitted sheets
  • Hem, closure and stitching details
  • Shrinkage limit after washing
  • Labels, packing and any certification your buyers require

How does laundry change the decision?

Commercial laundering at high temperatures, with strong chemicals and tumble drying, shortens the life of any sheet. Heavier and denser sheets cost more to wash and dry each cycle. Before you choose a construction, ask your laundry how it processes linen, then test samples through real cycles and measure shrinkage and wear.

When you are ready to price a programme, send us your spec sheet and room count. We will match it to the right construction and supply samples for your own wash test. You can see the range on our institutional textiles page.

Frequently asked

What thread count do hotels use?
Most full-service hotels use 200 to 300 thread count single-ply percale. Luxury hotels often use 300 to 400 thread count sateen.
Is percale or sateen better for hotels?
Percale lasts longer in industrial laundry and feels crisp. Sateen feels smoother and looks more luxurious, but wears faster and costs more to launder.
Why do some sheets claim 1,000 thread count?
Usually by counting each strand of multi-ply yarn separately. Ask for the single-ply count and the fabric weight.
Should hotels use flat or fitted bottom sheets?
Many use flat sheets for both layers because they launder and fold more efficiently. Fitted sheets look neater but the elastic wears out sooner.